Instructions Descaling Tabs
- Dissolve the descaling tab in 500 ml warm/hot (not boiling) water and stir thoroughly till it is dissolved.
- Add the solution to the water tank and add cold water till the top.
- Start the descaling procedure by pushing both buttons simultaneously for 3 seconds until they both start blinking. Push either button to start the procedure.
- When the whole solution has passed through the machine once, the descaling procedure is completed.
- Rinse the machine by running at least about half a water tank (minimum 500 ml) of fresh water through the machine. You can do this again by starting the descaling procedure and interrupt it by pressing a button when completed.
- The rinsing is completed when the water coming out of the nozzle is clear and not longer foamy. Switch the machine off or press a button to end the procedure.